Home › TV Mounting & Cable Concealment › Edgewater
In an Edgewater tower the cable question is usually settled before anyone picks up a tool, because the wall behind the television is a poured concrete shell with a thin layer of board furred onto it. That leaves roughly the depth of a finger — not a cavity, and nothing a cable can travel down. The honest answer in most of these apartments is a surface route: a slim channel taking the HDMI and the power lead from behind the screen to the outlet, primed and painted so it stops registering as an object. Where a unit has a genuine framed partition, a low-voltage plate at each end is available and we will say so. Fitting the bracket into concrete, running signal cable where a real cavity exists, fitting a power kit approved for placing in a wall, the channel work and connecting the equipment are ours. Adding a socket at the mount, changing a circuit or burying a loose power lead inside the structure is electrical work for a licensed pro, and that hand-off is stated up front.
Start with the outlet, not with the television. In these buildings the power is rarely where people assume — it turns up in the baseboard under a window wall, in a floor box the developer set into the slab, or on the one solid return the layout allows. Tell us which of those you have and how far it is from the wall you want the screen on, and say whether that wall is the concrete demising wall or a partition somebody built. A photo of the outlet with the intended wall in the same frame answers all of it. Send it to (786) 788-8714 and we will come back with the route, the parts and the length of channel it takes.
The single most common Edgewater situation is a high-floor unit where the living area faces glass on two sides and the television has to go on the only wall with anything behind it — the one shared with the corridor or the neighboring apartment. That wall is structural concrete. There is no interior path through it, no clever tool that makes one, and a contractor who offers to cut into it should be sending you a very different set of documents than a handyman quote. What we do instead is anchor the bracket into the concrete properly, bring the cables across in a channel that follows the line of the wall rather than cutting diagonally across it, and finish it in the unit's paint. Done carefully, visitors look at the screen and never notice why the wires are absent.
Call (786) 788-8714 · Get a free quote
Every job gets a free written estimate with the scope, prep and materials named — not a vague day rate. Gold Hands Miami is insured. Work that legally requires a licensed trade is referred to a licensed pro.
Why an Edgewater tower wall has nowhere for a cable to go
Buildings that went up along the bay here from around 2010 onward are concrete frames with concrete slabs and concrete demising walls, finished inside with board held off the surface by thin furring. Our technician confirms that with a detector and, where the finish allows, by looking behind the existing outlet plate. The reading matters: a wall that sounds hollow because it is board on furring is not a wall you can drop a cable down, and installers who do not check that difference end up cutting an opening that reveals solid concrete an inch behind it.
Anchoring is the other half. A large panel on a concrete wall wants masonry fixings set to depth in properly cleared holes, not the packet of wood screws that shipped with the mount. The bracket for a heavy screen gets its fixings placed away from any conduit the detector picks up, and if the only sound position conflicts with the height you wanted, we say so at the wall rather than shifting the bracket to a spot that will hold for a year. Concrete is forgiving of weight and unforgiving of a rushed hole.
Front desk, loading dock and insurance paperwork in Edgewater
Nearly every residence in 33137 runs through a management office, and the sequence is familiar: insurance documentation to the building, a service elevator and dock slot booked, arrival through the desk rather than the lobby, and work confined to the hours the association sets. Give us the building name when you book and most of that is done before the appointment exists. Where a building keeps an alteration policy, a surface channel usually sits outside it entirely while a cut plate does not, which is worth knowing before you decide which route you want.
Inside the apartment the practical risks are the floor and the glass. Polished concrete, large-format tile and engineered timber all mark, so the working area is covered before a ladder comes in, and drilling into concrete is done with extraction so the fine gray dust never reaches the furniture or the window track. Packaging, the old mount and any offcut of channel leave with our technician down the same service elevator they came up in, rather than accumulating by your door.
Soundbars, media consoles and the second cable run in Edgewater
A soundbar is not an afterthought on these walls, it is a second bracket and a second cable run, and it has to be planned at the same time as the screen or you end up with a bar crowding the bottom of the panel and a cable crossing the first one. Our technician sets the gap by the height of the screen and the seating position rather than by whatever looks tidy on a tape measure, then brings both cables into a single channel so the wall carries one vertical line rather than a crossing pair.
Where a media console stays on the floor, the run only has to reach the top of it and the rest disappears behind the furniture. Where the client wants nothing on the floor at all, the equipment goes on a shelf or in a recess and the signal cable has to be long enough to reach it with slack — a detail that sounds trivial until a cable that was cut to length stops the television being lifted off the bracket for a firmware port later. We leave service loops for exactly that reason.
Neighborhoods and ZIP codes we cover in Edgewater
TV Mounting & Cable Concealment in Edgewater — questions we get asked
How is a price reached for hiding TV cables in an Edgewater apartment?
By looking at the wall, not by quoting a menu item. Concrete anchoring, the length of the run, whether a soundbar joins it, whether the building wants documented hours and a dock slot — all of it moves the work. Send the screen size, a photo with the outlet and the intended wall both visible, and the building name, and you get a written scope back listing the route, the materials and the single task that has to pass to an electrician. There is no charge for that and it is the document the job is measured against later.
Can I trust someone in my Edgewater unit with a large screen when I am not there?
Plenty of owners here are not in Florida on the day, so the name of the technician goes to you and to the front desk in advance, and the desk logs the entry and exit. Photographs of the finished wall, the connected equipment and the tidied room reach you before the end of that day. Our technician does the unboxing and takes the weight of the panel alone, and damage occurring in that process would sit with us — which is the honest reason no resident and no concierge is asked to hold a corner.
My Edgewater building's alteration rules are strict. Will they block this?
Surface work rarely troubles them. Anchoring a bracket in a wall that is yours, running a painted channel and setting up the equipment is not the kind of change most managements review. Cutting openings for pass-through plates can be, particularly where a building treats any penetration of wall board as an alteration, and demising walls are a separate matter again because they belong to the structure. Name the building for us and the route is designed to its rules; where one is not permitted, the alternative is on the table the same day rather than after a refusal.
Is there any way to get the cables inside the wall in an Edgewater condo?
Only where there is a wall to get inside. Board furred onto concrete has no usable depth, and that describes the majority of the towers along this stretch of the bay, so the truthful answer for most units is no. Framed partitions built inside an apartment are different and can often take a plate at each end. Power never shares the shortcut: it is a relocation kit rated for in-wall use, or power brought to the mounting point by a licensed electrician. Threading a standard cord through a wall is not on offer here at any price.
I rent an Edgewater apartment. What will the wall look like when I hand it back?
With a channel the wall is handed back as a few filled pin-points under fresh paint, and removing it when the tenancy ends can be booked as part of the same arrangement. Cut plates leave openings that belong to the landlord's property and need their agreement in writing beforehand — a sentence in an email is enough, but it has to exist. The concrete anchor points from the bracket itself are the other thing to plan for, so we keep them to the minimum the screen's weight actually requires and note where they are.
Everything in my Edgewater unit runs off one wall outlet near the floor. Is that workable?
Usually yes, and it is the most common layout in these towers. The screen's power reaches that outlet either through a channel or through an in-wall-rated kit if the wall permits one, and the console equipment plugs in at the same point. What we will not do is chain the load onto an extension pushed behind the furniture and call it solved. If the position of that single outlet genuinely does not work for the layout you want, the fix is a second outlet, and that is a licensed electrician's work with the building's approval behind it.
How long does TV mounting take?
Most jobs take 45 to 90 minutes depending on wall type and cable concealment. Concrete and brick walls take a bit longer because of drilling.
Do I need to provide the mount bracket?
You can provide your own, or we bring one. We recommend fixed, tilting, or full-motion based on your TV size and where you sit relative to the wall.
Other work we do in Edgewater
- Ceiling Fan Installation & Repair in Edgewater
- Door Repair & Installation in Edgewater
- Ceiling & Drywall Repair in Edgewater
- Faucet Installation & Repair in Edgewater
- Furniture Assembly in Edgewater
- Garbage Disposal Installation in Edgewater
- Light Fixture Installation in Edgewater
- Interior & Exterior Painting in Edgewater
- Picture & Mirror Hanging in Edgewater
- Shelf & Closet System Installation in Edgewater
- Toilet Installation & Repair in Edgewater
Need tv mounting & cable concealment in Edgewater?
Send photographs of the job to (786) 788-8714 and a written quote comes back naming the scope and the materials. The quote costs nothing, and nothing reaches the invoice that was not on it.