How Much Does It Cost to Mount a TV in Miami? (2026 Guide)

Blog › July 10, 2026 · 5 min read

If you've searched "TV mounting cost Miami" and gotten five different answers, you're not alone. Prices swing based on wall material, TV size, cord concealment, and whether you already own a mount. Here's a transparent breakdown so you know what you're paying for before anyone shows up with a drill.

Typical TV Mounting Prices in Miami (2026)

Gold Hands bills an $80 service call and $80/hr labor with a 2-hour minimum. Final written price depends on wall type (studs vs concrete), mount style, wire hide, and soundbar work — call (786) 788-8714. These rates cover a standard drywall or concrete-block wall with studs (or masonry anchors) in a normal location — fireplace, vaulted, or tile/stone walls are scoped after photos.

Gold Hands quotes in writing after a quick description of your TV size, wall material (studs vs slab), and whether you want cords hidden. No invent per-size package menus.

• Written estimate: Free
• Labor: $80/hr · 2-hour minimum
• Concrete / condo / fireplace / wire hide / soundbar: quoted after wall type
• Mount bracket: yours, or we can supply (parts cost disclosed before work)

What Changes the Price: Wall Type Matters a Lot

Miami homes are a mix of poured concrete, CBS (concrete block and stucco), and drywall-over-furring-strip walls, and each one changes the job significantly. Drywall with studs in a normal 16" or 24" spacing is the fastest and cheapest to mount into — a competent installer can find studs, mark, drill, and mount in under an hour.

Concrete block (CBS) construction, extremely common in South Florida single-family homes and condos, requires a hammer drill, masonry bits, and concrete anchors rated for the TV's weight. This adds time, tool wear, and skill requirements, which usually means more labor time than a stud-mount job of the same TV size — we quote after photos.

Older homes with plaster walls or homes with tile/stone feature walls (common in Miami great rooms and primary bedrooms) are the most labor-intensive. Drilling into tile risks cracking it, so the installer needs to go slow, sometimes pre-drill pilot holes with a diamond bit, and use appropriate anchors. Expect more labor time than a standard stud job for tile or natural stone walls — we quote after photos.

• Drywall with wood studs: usually the fastest visit
• Concrete block (CBS): hammer drill, masonry anchors, more time
• Plaster or lath-and-plaster (older homes): slower anchoring
• Tile, marble, or stone accent wall: higher crack risk, slower drilling
• Metal stud framing (some newer condos): different anchor type

Cord Concealment: The Detail Most People Underestimate

A mounted TV with cords hanging down the wall looks unfinished, and it's the single most common add-on request Gold Hands gets. There are two main routes, and the price gap between them is real.

The cheaper option is an external cord cover — a paintable plastic raceway that runs down the wall and holds the cables. It's a 15–20 minute add-on, usually $40–$70, and it can be painted to match the wall so it's fairly discreet.

The more polished option is in-wall cord concealment, where a low-voltage in-wall rated cable kit routes the HDMI and power cords inside the wall cavity between two low-voltage boxes, so nothing is visible at all. This takes longer (30–60 extra minutes), and on concrete block walls it may not be possible at all since there's no open wall cavity to route through — in those cases, the raceway is really the only option, or a licensed electrician needs to add a dedicated outlet, which Gold Hands refers out.

One safety note: running a standard extension cord inside a wall is a fire code violation. Any in-wall power run has to use an in-wall-rated cable kit designed for this purpose, or a proper outlet needs to be added behind the TV by a licensed electrician. A reputable installer won't cut corners here even if it's faster.

• External cord cover/raceway: works on any wall type — quoted with scope
• In-wall cord concealment kit (when wall type allows): quoted with scope on locked hourly
• New outlet behind TV (requires licensed electrician — Gold Hands refers this out): separate electrician quote

Other Factors That Raise the Price

Beyond wall type and cord concealment, a few other factors show up on real invoices. TV weight and size affect the mount hardware needed — anything over 65" often needs a heavier-duty full-motion or tilt mount rated for 100+ lbs, which costs more than a basic fixed mount.

Height and access matter too. Mounting above a fireplace, in a stairwell, or on a wall with a vaulted ceiling often requires a ladder, extra bracing, or a second person for safety, which adds to labor time. Soundbar installation done at the same visit is usually modest extra time since the installer is already up on the ladder with tools out — quoted with scope.

Old mount removal (taking down a previous TV or an old wall unit) typically adds $20–$40. And if studs aren't where expected and toggle-bolt anchors are needed for a heavier TV, that can add another 15–20 minutes of work.

• TV over 65" (heavier mount hardware): may add time
• Above-fireplace or high/hard-to-reach mounting: may add time
• Soundbar mounted same visit: usually modest extra time
• Removing an old mount/TV first: may add time
• Anchor upgrades for heavier TVs without studs: hardware + time disclosed before drilling

What's Included When You Book Gold Hands for TV Mounting

When you book through Gold Hands' tv-mounting.html page, the quote you get is based on the details you provide up front — TV size, wall type, and whether you want cords hidden — so there's no bait-and-switch once the installer arrives. The visit includes stud/anchor location, level mounting, cable connection to your existing devices, and a walkthrough to make sure the height and angle work for your seating.

Gold Hands is insured, which matters more than people think for this job specifically — you've got a $1,000+ television being lifted onto a wall, and if something is dropped or a wall is damaged, insurance is what protects you, not a verbal promise. Gold Hands doesn't do licensed electrical work like adding new circuits or outlets; for those, the job gets referred out to a licensed electrician, and that's disclosed before booking, not after.

Frequently Asked Questions

Do I need to buy the TV mount myself, or does Gold Hands supply it?

Either works. If you already have a mount, bring it and labor is quoted alone. If you don't, Gold Hands can supply a mount matched to your TV size and weight — parts cost disclosed in the written quote before work.

Can you mount a TV on a concrete block wall in an older Miami home?

Yes, this is one of the most common wall types in South Florida and Gold Hands handles it regularly with a hammer drill and concrete-rated anchors. It takes longer than drywall and costs a bit more, but it's a routine job, not a specialty one.

Is it safe to run power cords inside the wall myself?

Running a standard extension cord inside a wall is a fire code violation. If you want a fully hidden setup, it needs either an in-wall-rated low-voltage cable kit (fine for HDMI/cable signal) or a new outlet installed by a licensed electrician for the power side. Gold Hands will tell you which applies to your setup and refers electrical outlet work to a licensed pro.

How long does a typical TV mounting job take?

A standard mount on drywall with studs takes about 45–75 minutes. Concrete block, tile walls, in-wall cord concealment, or above-fireplace installs can push the visit to 1.5–2.5 hours.

What size anchors or mount do I need for a 75-inch TV?

Most 75" TVs weigh 60–90 lbs and need a mount rated for at least 100 lbs with a wide bracket pattern, plus either studs or heavy-duty concrete/toggle anchors. Gold Hands checks the TV's VESA pattern and weight before the visit to bring the right hardware.

Do you offer same-day TV mounting in Miami?

Same-day or next-day appointments are often available depending on the day and area. Call (786) 788-8714 to check current availability for your neighborhood.