Blog › November 5, 2026 · 5 min read
Does a shower resealing quote include removal, cleaning, and prep work?
Yes, a proper shower resealing quote should cover removing the old caulk, cleaning the joint down to bare tile or grout, and treating any mold before new sealant goes in. If a quote only mentions "caulk a shower" with no mention of removal or cleaning, ask what's actually included before you book, because skipping those steps is the main reason new caulk fails in a few months.
Key takeaways
- A real resealing quote includes old caulk removal, cleaning, mold treatment, and full drying before new sealant goes on
- Skipping removal or cleaning is the top reason new caulk peels or grows mold again quickly
- Price and time depend on number of joints, mold severity, and any grout or drywall damage found once work starts
- Caulking and sealing is quoted by phone or photos and billed at $100/hour with a 2-hour minimum, not the free painting estimate
- If water is getting behind the tile or shower pan, that's a waterproofing issue referred to our GC partner, not a caulk fix
What a complete resealing job actually involves
Resealing a shower is not just squeezing a new bead of silicone over the old one. The old caulk has to come out first, usually with a utility knife or a caulk removal tool run along both edges of the joint, then peeled out in strips. Whatever residue is left behind, old silicone, soap film, mineral deposits, gets scraped and cleaned with isopropyl alcohol or a dedicated silicone-adhesion cleaner so the new bead has something to actually stick to.
If there's any black or pink staining in the old caulk line, that gets treated separately. Pink stains are usually a bacteria (Serratia marcescens) that thrives in the humidity of a shower stall. Black is almost always mold that has worked into the porous grout or old caulk. Both need to be killed and the area dried before resealing, otherwise you're just sealing the problem back in.
- Old caulk cut out and scraped clean
- Residue removed with alcohol or adhesion cleaner
- Mold or mildew spots treated before resealing
- Joint fully dried before new sealant goes on
Why the drying step matters more in South Florida
Silicone sealant will not bond properly to a damp surface, and bathrooms here hold humidity longer than almost anywhere else in the house. A joint that looks dry to the eye can still have moisture trapped in the grout lines or behind the tile edge, especially in units with poor bathroom exhaust fans or in older condo buildings where the fan barely moves air. If that moisture gets sealed in, the new caulk can bubble, peel, or grow mold again within weeks.
That's why a careful job includes a real drying period between cleaning and resealing, not just a quick wipe-down. On jobs where the old caulk shows heavy mold, sometimes it makes sense to run a fan or dehumidifier in the room for a stretch before applying new sealant. It's a small step that gets skipped when someone is trying to move fast through a quote-and-go job.
What can change the price or scope once we're on site
A phone or photo estimate gives a solid starting point, but a few things only show up once the old caulk is actually removed. If the grout underneath is cracked or crumbling, that's a different repair than a simple reseal. If there's soft drywall or a spongy spot near the tub spout or corner, that points to water getting behind the tile, which is a bigger issue than caulk alone can fix.
Multiple joints add time too. A single tub-to-wall line is quick work once you're set up, but a full shower stall with a pan joint, two or three wall corners, and a fixture surround takes longer because each transition needs its own clean cut and tooling. None of this changes the fact that removal and cleaning are part of the job, it just changes how long the visit runs, which is billed on the $100/hour rate with a 2-hour minimum per visit.
- Cracked or missing grout found under old caulk
- Soft or discolored drywall near the tub or shower pan
- Multiple joints, corners, or fixture surrounds in one stall
- Heavy mold needing extra cleaning and dry time
Materials matter as much as the labor
Not all caulk is built for a wet environment. A 100% silicone sealant rated for kitchen and bath use, ideally one labeled mildew-resistant, is what holds up against daily water exposure and the heat that builds up in a closed shower stall. Cheaper acrylic or latex caulk may look fine going on, but it dries out, shrinks, and cracks faster, especially once it's exposed to repeated hot water and steam.
Color matters too, and it's worth mentioning before the job starts rather than after. Caulk comes in a range of whites and almonds, and matching it to existing grout or fixtures makes a real difference in how finished the shower looks once it's done. Tooling the bead smooth with a finishing tool or a gloved finger, right after application, is what gives it that clean factory line instead of a lumpy DIY look.
Getting an accurate quote before anyone shows up
Since resealing isn't a painting job, there's no on-site walkthrough built into the estimate, quotes for caulking and sealing work are put together over the phone or from photos. Sending a few clear pictures of the shower, close up on the joints, the corners, and any discolored spots, lets us price the visit accurately before booking.
Jobs can be booked directly online at /book with a $50* deposit, which is simple for straightforward reseals. If the photos show something more involved, like drywall damage behind the tile or a crack running into the shower pan, that's worth flagging on the call so the scope is clear going in. Full details on how this work is handled are on the /caulking-and-sealing page.
* Minimum visit $200 — smaller jobs can be combined into one visit.
When resealing isn't the right fix
Sometimes what looks like a caulk problem is actually a sign the shower pan or waterproofing membrane underneath has failed. If water is getting into the wall cavity or subfloor, no amount of new silicone on the surface will solve it, that's a waterproofing and tile issue, not a sealant issue. In those cases, the honest answer is that resealing will buy some time but won't stop the leak.
Bathroom work beyond sealant and caulk, full tile replacement, pan repair, or anything requiring a permit, runs through our GC partner, who holds the contractor's license. Gold Hands Miami handles the caulking and sealing side directly, and if a job turns out to need more than that, it gets referred out rather than patched over. Call (786) 788-8714 if you want to talk through what you're seeing before deciding which direction to go.
Frequently Asked Questions
Do I need to clear out the shower before the appointment?
Removing shampoo bottles, mats, and anything on the shower floor or ledges helps, but the actual caulk removal and cleaning is part of the job itself and gets done on site.
Can new caulk go over old caulk if it still looks okay?
It's not recommended. Silicone doesn't bond well to old silicone, so layering new over old usually peels within a short time. Full removal gives the new bead a clean surface to grip.
How long should I stay out of the shower after resealing?
Follow the cure time printed on the sealant tube being used, since it varies by product and humidity in the room. Using the shower too soon is one of the most common reasons new caulk fails early.
What if there's mold that keeps coming back after resealing?
Recurring mold usually points to a ventilation problem or moisture trapped behind the surface rather than a caulking issue. Worth checking the bathroom exhaust fan and whether water is getting behind the tile before resealing again.
Is this covered by a warranty like painting is?
No, the 5-year transferable warranty applies to painting work only. Caulking and sealing jobs are quoted and completed as standalone visits.
Do you work on condo bathrooms with HOA rules?
Yes, caulking and sealing is common in condo units across Miami-Dade and Broward. If the building requires scheduling through management or has rules about work hours, let us know when booking so it's factored into the visit.
Related guides
- How long does it take to assemble playground equipment?
- Do handymen typically charge for an in-person assessment before giving a quote?
- How long does assembling furniture with many parts typically take?
Have a project like this?
Miami-Dade & Broward, English & Spanish — insured and bonded. Painting gets a free on-site estimate (Miami to Fort Lauderdale); other jobs are estimated by phone or from photos. Related: caulking and sealing.
Call (786) 788-8714 Book online ($50* deposit)